[an error occurred while processing this directive]

PMP 450i Access Point

PMP 450i Access Point

Cambium Networks industry-leading 450 platform includes the all new PMP 450i and PTP 450i radios. The PMP 450i Access Point product platform is the most scalable industrial-grade wireless broadband solution available.

Specifications

Spectrum

  • Channel Spacing
    Configurable on 2.5 MHz increments, 3 GHz customizable to 50 KHz
  • Frequency Range
    3 GHz : 3300 - 3900 MHz, 5 GHz : 4900 - 5925 MHz
  • Channel Width
    5 MHz, 7 MHz, 10 MHz, 15 MHz, 20 MHz, 30 MHz or 40 MHz

Interface

  • MAC (Media Access Control) Layer
    Cambium Networks proprietary
  • Physical Layer
    2x2 MIMO OFDM
  • Ethernet Interface
    100/1000BaseT, full duplex, rate auto negotiated (802.3 compliant)
  • Protocols Used
    IPv4, IPv6, UDP, TCP/IP, ICMP, Telnet, SNMP, HTTP, FTP Network ManagementIPv4/IPv6 (dual stack), HTTP, HTTPS, Telnet, FTP, SNMPv2c and v3, Cambium Networks cnMaestroTM
  • MTU
    1700 bytes
  • VLAN
    802.1ad (DVLAN Q-inQ), 802.1Q with 802.1p priority, dynamic port VID

Performance

  • Subscriber Per Sector
    Up to 238
  • ARQ
    Yes
  • Maximum Deployment Range
    Up to 40 miles (64 km)
  • Latency
    3 - 5 ms, typical
  • GPS Synchroization
    Yes, via Autosync (CMM5 or UGPS)
  • Quality of Service
    Diffserve QoS

Physical

  • Antenna Connection
    50 ohm, N-Type (Connectorized version only)
  • Surge Suppression (LPU fitted)
    EN61000-4-5: 1.2us/50us, 500 V voltage waveform Recommended external surge suppressor: Cambium Networks Model # C000000L033A
  • Mean Time Between Failure
    > 40 Years EnvironmentalIP67, IP66
  • Temperature / Humidity
    -40°C to +60°C (-40°F to +140°F), 0-100% condensing

Downloads